POLYTONE®
Polyamide Resins - Non Reactive
About POLYTONE® PA Series
Polyols & Polymers Pvt Ltd via its POLYTONE ® range of Resins offers a broad range of technical resins specifically designed for the needs of manufacturing of paints, coatings, varnishes, inks, cables, insulations, wire enamels, can coatings , epoxy diluents etc.
POLYONE PA Series Non-Reactive Polyamide Resins are designed for providing premium performance. These are thermoplastic polyamide resins and formulated to exhibit good solvent compatibility, gel resistance, pigment wetting.
These are particularly soluble for formulating flexo and rotogravure printing inks providing adhesion, gloss and water resistance.
POLYTONE® PA 302/3031
Type
Non Reactive Polyamide Resin
Co Solvent Based
Solubility
Co Solvent
Chemistry
Polymeric Fatty Acid Based Polyamide Resin
POLYTONE® PA 302/303
Type
Non Reactive Polyamide Resin
Co Solvent Based
Solubility
Co Solvent
Chemistry
Polymeric Fatty Acid Based Polyamide Resin
| Polyamide Resin /Non Reactive/CO- Solvent Grade | ||
|---|---|---|
| POLYTONE® PA 302 | POLYTONE® PA 303 | |
| Colour | Bright light yellow | Bright light yellow |
| Softening Point (B & R) | 105° C – 110 ° C | 105° C – 115 ° C |
| Viscosity of 35% solution in 1:1 ratio of Toluene:Butanol at 30º C | 60 - 85 mPas | 80 -120 mPas |
| Viscosity of 35% solution in 1:1 ratio of Toluene:Butanol at 30º C | 20 – 28 Sec | 25 – 35 Sec |
| Acid Value | 7 mg KOH/ g resin (Max) | 7 mg KOH/ g resin (Max) |
| Amine Value | 7 mg KOH/ g resin (Max) | 7 mg KOH/ g resin (Max) |
| Characteristics |
|
|
| Solubility | POLYTONE® PA 302/303 is soluble In n-Butanol, n--Propanol, Cellosolve and mixtures of these with aromatic hydrocarbons e.g. Toluene and Xylene. This resin is partially soluble in iso-propanol and insoluble in ethanol , aliphatic and aromatic hydrocarbons. Under certain conditions the solutions forms reversible gels on standing. In order to achieve complete solubility in alcohol solutions , sometimes it is necessary to add small percentage of water or aromatic hydrocarbon solvent . For optimum solubility blends of alcohols and hydrocarbon solvents are required. | |
| Application/Industry | POLYTONE® PA 302/303 is a polymeric fatty acid based co-solvent grade non reactive polyamide resin in solid form suitable for flexographic and gravure printing inks. This resin provides excellent resistance to grease and water, and good glossy sharp prints. It has excellent adhesion to treated polyethylene and other plastics. POLYTONE® PA 302/303 has good flexibility and very good solvent release properties. | |
POLYTONE® PA 350/351
Type
Non Reactive Polyamide Resin
SpiritBased
Solubility
Alcohol
Spirit Soluble
Chemistry
Polymeric Fatty Acid Based Polyamide Resin
| Polyamide Resin / Non Reactive/spirit/alcohol Soluble | ||
|---|---|---|
| POLYTONE® PA 351 | POLYTONE® PA 350 | |
| Colour | Bright light yellow | Bright light yellow |
| Softening Point (B & R) | 140° C – 150 ° C | 105° C – 115 ° C |
| Viscosity of 40% solution in Industrial Spirit at 25º C | 24 - 50 mPas | - |
| Viscosity of 40% solution in Industrial Spirit at 25º C | 15 - 20 Sec | - |
| Viscosity of 35% solution in n-Propanol at 30º C | - | 21 - 24 Sec |
| Acid Value | 7 mg KOH/ g resin (Max) | 7 mg KOH/ g resin (Max) |
| Amine Value | 7 mg KOH/ g resin (Max) | 7 mg KOH/ g resin (Max) |
| Characteristics |
|
|
| Solubility | POLYTONE® PA® 351 shows excellent solubility in a variety of solvents that do not attack rubber stereos . Under certain conditions the solutions forms reversible gels on standing and to avoid this, it is recommended to add small percentage of water or higher alcohols or aromatic hydrocarbon solvent. POLYTONE® PA 351 has infinite solubility in ethanol and higher alcohols. It is soluble in methanol at higher concentrations – 40% and above | |
| Application/Industry | POLYTONE® PA 351 is an alcohol soluble non-reactive polyamide resin in solid form suitable for flexographic printing inks. This resin exhibits good anti-blocking characteristics and finds use in specialized flexographic inks and release lacquers. Inks prepared from this resin have good adhesion to a variety of substrates, excellent solvent release properties, low odor and good nitrocellulose compatibility. | |
- POLYTONE® PA 302/303 is a polymeric fatty acid based co-solvent grade non reactive polyamide resin in solid form suitable for flexographic and gravure printing inks. This resin provides excellent resistance to grease and water, and good glossy sharp prints. It has excellent adhesion to treated polyethylene and other plastics. POLYTONE® PA 302/303 has good flexibility and very good solvent release properties.
- POLYTONE® PA 351 is an alcohol soluble non-reactive polyamide resin in solid form suitable for flexographic printing inks. This resin exhibits good anti-blocking characteristics and finds use in specialized flexographic inks and release lacquers. Inks prepared from this resin have good adhesion to a variety of substrates, excellent solvent release properties, low odor and good nitrocellulose compatibility.
- Available in 20/25Kg HDPE Line KRAFT Paper Bags with Anti Static Liner or 20/ 25Kg HDPE Bags
- Choice of ISPM 15 Standard Heat Treated/Fumigated Pallets or Plastic Pallets.
- Individual pallets must NOT be double stacked – pastilles/lumps are likely to agglutinate.
- Properties are not affected by agglutination
- Can be stored up to 12 months at temperatures below 35 °C.
Please follow advice and information provided in MSDS. Protective clothing & workplace hygiene measure must be observed at all times.
Detailed MSDS available on request.
Want to Know more!
Get in touch with our experts!!
